Caltherm logo
Direct contact
Caltherm +33 (0)473 775 575 caltherm@caldic.com
Image Caltherm direct contact.

                                                                                                            

     Go Back  

Applications overview

Reach high performances with Caltherm high quality thermal fluids

The pharmaceutical industry stands for innovation, high precision and demand. As a result, the manufacturing processes are sophisticated and involve phases with high thermal stresses, requiring the use of reliable, high-quality heat transfer fluids.

Caltherm's high-tech thermal fluids are made from mineral, synthetic or silicone products and can replace glycol mixtures to guarantee the system from withstanding high pressures at high temperatures (e.g. 85 bars at 300°C for water).

The wide Caltherm brand meets the pharmaceutical industry constraints by offering fluids suitable for either very low or very high temperatures (below -80°C or above 350°C) or fluids whose versatility guarantees permanent efficiency from -50°C to 300°C. Each process step is then controlled at a regulated temperature.

For open circuit or water bath type applications, some Caltherm fluids can be used up to 195°C with excellent resistance to oxidation and low odour and toxicity.

For example, in small pharmaceutical units, where safety is essential, the Caltherm S1050 is an ideal choice. Its silicone technology ensures optimum fluid resistance and long service life, even at high temperatures. Moreover, thanks to its flash point above 300°C and often above the process temperature, installations are not subject to heavy administrative constraints due to regulatory constraints.

 

Our products

Caltherm 400

Fluid for high temperature and low viscosity

  • Nature
  • Minimum Temperature °C
  • Maximum Temperature °C
  • Flash Point °C
  • System Open/ Closed
  • Silicon
  • -40 °C
  • 400 °C
  • 160 °C
  • Closed
  • Unique Product Features
  • Possible to use and resistance at high temperatures
  • Possible to use at low temperatures
  • Inert compound

Caltherm C66

Synthetic fluid for very high temperature application

  • Nature
  • Minimum Temperature °C
  • Maximum Temperature °C
  • Flash Point °C
  • System Open/ Closed
  • Synthetic
  • 0 °C
  • 345 °C
  • 175 °C
  • Closed
  • Unique Product Features
  • Possible to use and resistance at high temperatures
    and atmospheric pression

Caltherm CADX10

Synthetic fluid for extreme temperatures applications

  • Nature
  • Minimum Temperature °C
  • Maximum Temperature °C
  • Flash Point °C
  • System Open/ Closed
  • Synthetic
  • -45 °C
  • 250 °C
  • 136 °C
  • Closed
  • Unique Product Features
  • Possible to use at low and high temperatures 

Caltherm CD12

Synthetic fluid for cold and warm application

  • Nature
  • Minimum Temperature °C
  • Maximum Temperature °C
  • Flash Point °C
  • System Open/ Closed
  • Synthetic
  • -85 °C
  • 260 °C
  • 67 °C
  • Closed
  • Unique Product Features
  • Possibility to use at very low and high temperatures
  • NSF certified

Caltherm CXP

Paraffin based fluid for warm system

  • Nature
  • Minimum Temperature °C
  • Maximum Temperature °C
  • Flash Point °C
  • System Open/ Closed
  • White mineral oil (petroleum)
  • 0 °C
  • 315 °C
  • 180 °C
  • Open max 120 °C / Closed
  • Unique Product Features
  • Possible to use in open system till 120°C 
  • Non toxic 

Caltherm S 1050

Fluid for high temperature with very high flash point

  • Nature
  • Minimum Temperature °C
  • Maximum Temperature °C
  • Flash Point °C
  • System Open/ Closed
  • Silicon
  • -50 °C
  • 350 °C
  • 318 °C
  • Open(max 195°C) / Closed
  • Unique Product Features
  • Very high flash point (over the use temperatures)
  • Possibility to use in open system till 195°C
  • Non toxic

Caltherm SY2FC

Synthetic fluid for mixt temperatures application

  • Nature
  • Minimum Temperature °C
  • Maximum Temperature °C
  • Flash Point °C
  • System Open/ Closed
  • Synthetic
  • -30 °C
  • 300 °C
  • 160 °C
  • Closed
  • Unique Product Features
  • Possible to use at low and high temperatures 
  • NSF certified

Caltherm SYN FC

Synthetic fluid for high temperature application at very high flash point

  • Nature
  • Minimum Temperature °C
  • Maximum Temperature °C
  • Flash Point °C
  • System Open/ Closed
  • Synthetic
  • -30 °C
  • 350 °C
  • 260 °C
  • Closed
  • Unique Product Features
  • Possible to use at low and high temperatures
  • High flash point

Caltherm UBT

Fluid for extrem low temperature application

  • Nature
  • Minimum Temperature °C
  • Maximum Temperature °C
  • Flash Point °C
  • System Open/ Closed
  • Silicon
  • -100 °C
  • 270 °C
  • 49 °C
  • Closed
  • Unique Product Features
  • Possible to use at extrem low temperatures
  • Inert compound

Caltherm UBVI

Fluid extreme low viscosity at low temperature and inflammable

  • Nature
  • Minimum Temperature °C
  • Maximum Temperature °C
  • Flash Point °C
  • System Open/ Closed
  • Silicon
  • -70 °C
  • 200 °C
  • 77 °C
  • Closed
  • Unique Product Features
  • Possible to use at very low temperatures
  • Inert compound
  • Non inflammable product

Request more information or a quotation

If you would like to know more about this application and its products or would like to request a quotation, then you can request more information via this form.

Contact information:

Address:

Your inquiry:

*By submitting my contact details I agree to the Caldic Privacy Policy. I hereby give my consent to my data being processed in accordance with Caldic’s Privacy Policy and to receive business related information from Caldic. I understand that I can unsubscribe at any time.